Energy Savings in Industry

Save 70% of energy loss. C-Coat saves approx. 70% of energy loss and protects equipment. C-Coat helps you comply with Work Health & Safety regulations. C-Coat: The Smart Choice for Energy Savings Coatings and Sustainability. When it comes to industrial applications, managing energy loss is crucial for both cost efficiency and environmental sustainability. C-Coat is an advanced energy-saving coating solution that can significantly cut energy usage in a variety of industrial processes. This unique coating is designed to reduce heat transfer, ensuring that your equipment and facilities run at maximum efficiency. Experience Unmatched Energy Savings with C-Coat's Cutting-Edge Technology. Our energy-saving coating solutions offer a smart and efficient way to reduce energy consumption. Key benefits include: prevents overheating in summer and frost penetration in winter; prolongs service life of coated vehicles, containers, reservoirs and tanks; blocks condensation and eliminates destructive corrosion processes; protects personnel against burns; durability for lower maintenance; heat insulation of processing equipment; protects copper and high-temp surfaces; thermal insulation of pipes and fittings; prevents condensation and corrosion; decreases the cost of heating at the source; decrease in repair and service costs; transported substances not affected; oil, gas and water pipe lines protection; reduction of power needs; aesthetic appearance and compatibility; high maintainability, no need to stop the technological process while applying; environmentally friendly material with no waste; can be colour-matched, suitable for large surfaces; considerable decrease in vibration and noise when applied to metal surfaces. Explore Real-World Application: The Power Of C-Coat In Action. To demonstrate the effectiveness of our energy-saving coating, two identical mobile container offices of 20-foot type with A/C units were used to compare the results. The first is a standard unit and the second has C-Coat of about 1-1.5mm thick layer applied with an airless spray gun (Graco 795). The ambient temperature was 38oC and the surface temperature was 41.5oC. In the standard office unit, the installed A/C unit could not reduce the indoor temperature below 33oC and used about 1.0KW of electricity. In the unit using C-Coat insulation coat, the indoor temperature was 24oC and A/C unit used about 0.6KW of electricity. So, the addition of C-Coat achieved 40% of electricity savings and an almost 10oC cooler indoor temperature. Enhancing Safety with the "Safe to Touch" Feature. In many process plants with high-heat processes in pipes or vessels, the safety of the maintenance staff and visitors is very important. To prevent injuries and skin burns due to accidental contact or touch to hot surfaces, you may exploit a unique feature of C-COAT that we call "SAFE TO TOUCH" feature. We nominated 5 sec zone (less than 58oC) as per standards. Custom-Tailored Solutions for Commercial Buildings. Commercial buildings are exposed to various thermal demands. However, the most common request is to block the heat from the lower floors (garage) to the upper floors (office). C-COAT performance depends on application, environment and temperatures. If C-COAT is to be applied over the existing EPS or mineral wool insulation, in retrofit projects, to improve insulating capacity please ensure surface preparation is done well and all loose ends replaced or repaired before spraying C-COAT. So, applying 0.5-1.0mm of C-COAT over existing EPS or mineral wool will double or increase thermal capacity of your project. Invest in Efficiency When You Call C-Coat. Adding our energy-saving coating to your industrial or commercial facility is a smart investment in performance and sustainability. By reducing energy loss, enhancing safety, and prolonging equipment life, we deliver value beyond just insulation. Get in touch with us at +61296743005 or info@c-coat.com.au to find out more about our products and services or to schedule a consultation. With a vision to make the world a better place, we supply revenue positive systems to reduce energy usage & protect the environment.