References
Exclusive distributor of C-Coat systems.
Al Fanar School, Nad Al Sheba, Dubai UAE
For distinctive dome-shaped structures at Al Fanar School in Dubai, developed by Al Barari Development Company, C-COAT Thermal Insulating Coating was applied to shield buildings from summer heat while providing waterproofing, breathability and a non-toxic finish.
Thermal insulating of BP plant XERVON Oberflächentechnik GmbH in Germany
At a BP plant with XERVON Oberflachentechnik GmbH, several hundred square metres of industrial process wall panels were coated with the C-COAT System (TIC 300HH) to save energy and provide safe-to-touch surfaces.
Research and Development cooperation with UPL University India
C-COAT partnered with UPL University of Sustainable Technology in Gujarat for R&D into the thermal and mechanical properties of C-COAT, testing, certification and Indian Government grant projects.
Footwear Factory Project Paragon India
Over two years, C-COAT's Indian distributor worked with Paragon's footwear process plant to prevent burn injuries and save energy, with Paragon engineers documenting the energy savings in a case study.
Residential project Italy
An Italian distributor's team trained at the C-COAT factory in Poland, then tested and reported on the C-COAT 100M Masonry NF plaster facade product line, confirming the material's superiority.
Caravan Home Renovation Project Australia
A team member's old caravan home used for attending car racing was stripped, primed and coated with C-COAT over one weekend, delivering thermal performance that impressed the racing community.
A/C unit for Locomotives project Trovon Australia
Tests for Trovon confirmed C-COAT can help roof-mounted locomotive A/C units cope with ~60C desert heat, with a ~1.0mm layer reducing heat flux by about 34% and surface temperature by 12C.
Colour matching to codes by paint suppliers in Australia
C-COAT offers two colour-matching options, tinting the base or applying a topcoat, noting differences in each supplier's base white and the number of coats needed to match a code.
Re-branding and the new packaging selected for C-COAT
C-COAT launched a new company logo in 2022 and switched to stronger, more economical square pails with a sealed top for longer shelf life.
Comprehensive FR testing in IGNIS Laboratory in Australia
A combination of tests in the IGNIS Laboratory determined fire blocking, spread and smoke development of C-COAT Thermal Insulating Coating and Intumescent Coatings, exposing 3.0mm coatings over fibre-cement board to furnace temperatures over 1,000C.
Pulford Air & Gas project No.3 in Australia
Pulford Air requested thermally insulated containers with a green finish; a thin layer of C-COAT was applied followed by a coloured topcoat and multiple containers were delivered.
Thermal protection of NAVY ships project India
Over a three-year project of testing and improvements, the C-COAT team resolved all requirements for a thermal protection project that is a pride of the Indian Defence and shipyard industry.
Colour matching to RAL code paints in Laboratory in Australia
A client request to match RAL colour codes was carried out at the Sydney facility, where the water-based coating had to be dried before matching and preformatted RAL formulas from the OEM tint supplier were adopted.
In-house Testing Chamber - Australia
C-COAT built a halogen-heated test chamber with heat flux and temperature sensors, collecting six months of data that led to patenting the C-COAT measurement model in December 2023.
Storage of C-COAT in Poland facility and transporting FCL to world market
C-COAT's Poland facility stores the water-based product in heated indoor areas over winter and loads full-container-loads to clients, with precautions against freezing during storage and transport.
Virgin Galactic space shuttle project
After two years of cooperation with The Spaceship Company (later Virgin Galactic), C-COAT's thermal insulating coating was implemented on a space shuttle to protect against extreme re-entry heat.
The “Safe to Touch” steam pipe 200oC project in INDIA
C-COAT's Indian distributor demonstrated the safe-to-touch feature over steam pipes with ~200C surface temperature, allowing bare-hand touch and publishing a surface vs safe-to-touch temperature graph.
LOKORAIL Project Bratislava Slovakia
LokoRail Slovakia applied C-COAT over rail cisterns transporting sensitive chemicals exposed to sun heat during long haulage, also preventing CUI and achieving low maintenance cycles.
Pulford Air & Gas project No.2 for BHP in Australia
Pulford Air & Gas ordered more heat-protected HQ structures for BHP, this time applied at C-COAT facilities and delivered to Pulford for assembly and shipment to Western Australia.
The first FR testing in IGNIS Laboratory in Australia
A 4.5mm fibre-cement board coated with C-COAT passed the strict Australian fire standard AS1530.3, and the accompanying Intumescent coating was also tested successfully.
Residential Colorbond roof project in Australia
A Sydney home with a Colorbond roof relying on constant air-conditioning had a thin 0.5-0.6mm layer of C-COAT applied, cutting surface temperature by about 20C and greatly reducing electricity use.
Hankook Tyre Factory South Korea
C-COAT was introduced to a major Korean tyre manufacturer as a replacement or complement for classic insulation over steam pipes and tyre moulds, demonstrating 43-68% temperature reductions.
SUEZ Water Treatment Plant Steam Pipes by Brolton Group NSW
SUEZ requested a safe-to-touch feature for hot steam pipes (150-200C) in its water treatment plants to prevent staff skin burns; C-COAT protected staff and later showed an estimated 15-35% energy reduction.
Pulford Air & Gas project No.1 in Australia
Pulford Air & Gas ordered heat protection for HQ containers housing compressors and nitrogen tanks used to fill mining truck tyres for BHP, operating in desert conditions above 55C.
Infrastructure for Schools NSW - Dapto High School demo project
As part of its community support policy, C-COAT applied a thin layer over the metal roof of a student-built school office at Dapto High School, with strong results that led to recommendations to NSW Ministers.
Contact
We use your details only to reply to your inquiry.
